Using a Graduated Neutral Density Filter

Lower Madera Canyon

Lower Madera Canyon – Big Bend Ranch State Park, Texas
Copyright © 2011 Jeff Lynch Photography
Shot taken with a Canon EOS 5D Mark II set on aperture (Av) priority using an EF 24-105m f/4L IS USM lens tripod mounted. The exposure was taken at 24mm, f/14 for 1/60th of a second at ISO 100 using a Singh-Ray warming polarizer and two-stop, soft graduated neutral density filter. Post capture processing was done entirely in Adobe’s Lightroom 3.
Click on the image above for a larger version.

Everyone knows I’m an old-fashioned kind of guy when it comes to getting the correct exposure “in-camera” as opposed to “in post”. For me, post-capture processing in Lightroom 3 or Photoshop CS5 is a matter of tweaking the RAW image to help recreate what I remembered seeing when I took the shot. A graduated neutral density filter is used to balance the exposure between the background and foreground of an image. As such, it is an essential tool that every landscape photographer should learn to use early in their career (or hobby). Yes, I know you could accomplish the same thing using a photo-blending technique like HDR but it’s much easier to do this “in camera” while you’re out in the field.

The way a graduated ND filter works is very simple, by reducing the amount of light transmitted through a portion of the filter to your camera’s sensor so that the foreground exposure more closely matches the background exposure. They are not perfectly matched mind you, just more closely. By positioning the graduated ND filter in front of the lens you can vary the amount of exposure “balancing” the filter does in each scene. You can position these filter by hand or by using a filter holder as shown in the image below.

This is my typical setup for a landscape shot with my 5D Mark II on a lightweight but sturdy tripod (Gitzo Traveller using an RRS ball-head) and a Singh-Ray graduated neutral density filter held in place by a Cokin “Z” holder, mounted on a wide angle lens. The graduated neutral density filter is generally a 2, 3 or 4-stop / soft ND grad made by Singh-Ray, a company that designs and builds the best quality photographic filters in the world.

Landscape Photography Setup

The purpose of the “ND Grad” filter used here was to “hold back” the bright sky to balance foreground exposure in this early evening shot of Madera Canyon. This allowed my DSLR to meter for the mid-tones without blowing out the bright highlights or losing all the shadow detail. The great thing about a graduated neutral density filter is that you, the photographer, have complete control over how much light the filter blocks by changing its position in the filter holder. Many photographers (myself included) prefer to hold the filter against the lens by hand, moving it to achieve exactly the effect we want.

On of my favorite landscape photographers Steve Kossack, is famous for teaching students “conscious control over colors and light” and a big part of his craft is in using the right filter at the right time. Steve’s also famous for hand-holding and moving his ND-Grad filters during the exposure so that each image is unique and one of a kind.

As Steve teaches, getting control of the colors and the light “in-camera” using a graduated neutral density is a great way to practice your craft in the field. Learning to properly use a few simple filters can extend your success and bring some much needed control to your landscape photography.

7 thoughts on “Using a Graduated Neutral Density Filter

  1. Lee Filters make a great holder and fantastic graduated filters for this purpose (they also have a rangefinder specific holder with 75mm filters. They have hard or soft edge filters as follows .3, .45, .6, .75, .9. They also do the 10 stop Big Stopper & full ND filters as well as colors such as Sky Blue, Corals, Tobacco etc.

  2. Pingback: Trick to Using a Graduated Neutral Density Filter | Views Infinitum

  3. Pingback: Photography Links of the Month for MAY 2011 « Rhonda Tipton's Photo Blog

  4. Jeff,

    Excellent article. I am still trying to get a handle on the ND filter. 2-stops never seems to be enough. How does one determine how much of an ND filter do you need?

    Thanks for all your great tips and photography you share here.

    • Scott,

      When used with a circular polarizer, a 2-stop ND-Grad is usually more than enough but it really depends upon the scene. If you adjust much more than 2 to 3 stops, your image may not look realistic.

      Jeff

  5. Sorry for the beginner question. I recognize the 5D MkII body, and of course the Cokin holder and grad, but what is it that is mounted between the filter holder and the camera? I’m sure there is a lense in there. What are the knobs and adjustment markers? Never seen anything like that – again, apologize for the noob question sir.

    • Trey,

      The lens in question is Canon’s TS-E 24mm tilt & shift lens which I use for both landscape and architectural photography. If you google “tilt & shift lens” you’ll find several articles on how these lenses work.

      Jeff

Comments are closed.